Description:
Advidia A-Series with physical reset buttons: A-15 / A-35 / A-44 / A-44-IR / A-46 / A-47 / A-54 / A-55 / A-65
Advidia B-Series with physical reset buttons: B-31 / B-33
Advidia VP-Series with physical reset buttons: VP-4 / VP-8 / VP-16
- Steps:
1. With the unit powered on, press and hold the reset button on back of unit (or under the dome) for 30 seconds.
2. Without releasing the reset button, unplug the power cable and hold reset for another 30 seconds.
- If it is a PoE camera, disconnect the network cable.
3. Plug the power cable back in STILL holding the reset button a final 30 seconds.
- If it is a PoE camera, plug in the network cable.
Advidia B-Series with physical reset buttons: B-210 / B-5360
- Steps:
1. With the unit powered on, press and hold the reset button on back of unit (or under the dome) for 30 seconds or until the blue LED (underneath the camera module) lights up.
This will revert all settings including the network back to defaults. For the camera's default IP address, please visit Advidia's support site: Advidia Camera & Encoder Support
NOTE: The following cameras do NOT have physical reset buttons: VP-1 / VP-16-L / VP-8-V2 / VP-16-V2 / A-14 / A-34 / A-34W / A-45 / A-200 / A-200-P